Model datasheet
NU210 Cylindrical Roller Bearing 50x90x20mm
Confirm the model number, dimensions, suffix, and replacement notes before sending a quotation request for repair or MRO sourcing.
Verified directory reference: Specifications have been reviewed, but the complete suffix and current order requirement must still be confirmed before purchase.
NU210 bearing specifications
| Parameter | Value |
|---|---|
| Model | NU210 |
| Category | Cylindrical Roller Bearing |
| Series | NU200 Series |
| Inner Diameter (ID) | 50 mm |
| Outer Diameter (OD) | 90 mm |
| Width | 20 mm |
| Material | Chrome Steel GCr15 |
| Closure | Open |
| Dynamic Load | 78.0 kN |
| Static Load | 88.0 kN |
| Speed Limit | 6500 RPM |
| Precision | P0 (ABEC-1) |
| Clearance | CN (Standard) |
NU210 brand designation references
Interchange Numbers: NU210
Catalogue designations reviewed for this model include SKF NU210ECP, FAG NU210E.TVP2, NSK NU210EM, NTN NU210, Timken NU210.
These catalogue references have source records, but the complete suffix and operating requirement must still be confirmed.
| Brand | Brand designation | Reference status |
|---|---|---|
| SKF | NU210ECP | Source recorded SKF rolling bearing catalogue — NU210ECP · |
| FAG | NU210E.TVP2 | Source recorded Schaeffler FAG rolling bearing catalogue — NU210E.TVP2 · |
| NSK | NU210EM | Source recorded NSK rolling bearing catalogue — NU210EM · |
| NTN | NU210 | Source recorded NTN rolling bearing catalogue — NU210 · |
| Timken | NU210 | Source recorded Timken bearing catalogue — NU210 · |
Frequently asked questions about NU210
What does the open design mean on a NU210 bearing?
The NU210 (50mm x 90mm x 20mm) is supplied open — without seals or shields — so lubrication and relubrication come from the surrounding housing or an external system. Compare seal types before deciding on the replacement.
Which part numbers are equivalent to NU210?
Equivalent designations include NU210ECP, NU210E.TVP2, NU210EM . These are brand-specific numbers for the same ISO boundary dimensions as the NU210 (50mm x 90mm x 20mm). The basic number matching does not confirm the complete specification — compare seal type, clearance, precision, cage, and lubrication suffix before ordering.
Does the NU210 come with C3 clearance?
This directory lists the NU210 with CN (Standard). C3 (increased internal clearance) versions are common for higher operating temperatures, higher speeds, or press-fit arrangements — specify the required clearance on your RFQ so the quotation matches the application. Read the clearance guide.
The NU210 is listed as a 50×90×20mm cylindrical roller bearing in open configuration. Part of the NU200 series, the directory records chrome steel gcr15 and P0 (ABEC-1) precision grade for RFQ verification.
The NU210 bearing cross-references to SKF NU210ECP, FAG NU210E.TVP2 and NSK NU210EM. This means you can replace an SKF equivalent, FAG alternative, NSK cross reference, or NTN interchange part with the same ISO boundary dimensions. Compare the full specification table and designation suffixes before ordering, especially the seal type (2RS vs ZZ) and internal clearance (C3 vs CN).
About the NU200 Series
The NU200 series is a single row cylindrical roller bearing with two integral flanges on the outer ring and a plain inner ring. The separable design allows the inner ring to be removed, simplifying installation. Optimized for high radial loads at moderate to high speeds.
Common Applications
- Electric Motors
- Machine Tools
- Gearboxes
- Pumps
- Compressors
Common applications for NU210
The NU210 is a common replacement candidate in the following equipment. Open the application guide to confirm the checks that apply to your machine before ordering:
Compare NU210 with nearby sizes
These models are the closest sizes in the same bearing family. They are not interchangeable — confirm the bore, outside diameter, and width before replacing the existing part.
| Model | Dimensions | Closure | Action |
|---|---|---|---|
| NJ209 | 45mm x 85mm x 19mm | Open | View specifications |
| NU209 | 45mm x 85mm x 19mm | Open | View specifications |
| NJ210 | 50mm x 90mm x 20mm | Open | View specifications |
| NU211 | 55mm x 100mm x 21mm | Open | View specifications |
| NU212 | 60mm x 110mm x 22mm | Open | View specifications |
Fast bearing RFQ
Tell us what bearing you need.
A model number is enough to start. If the marking is unclear, send the dimensions, application, or a shared photo link in the message.
- Small repair quantities and mixed model lists
- Model, suffix, and replacement review
- Price, lead time, packing, and shipping details