Model datasheet
NJ207 Cylindrical Roller Bearing 35x72x17mm
Confirm the model number, dimensions, suffix, and replacement notes before sending a quotation request for repair or MRO sourcing.
Verified directory reference: Specifications have been reviewed, but the complete suffix and current order requirement must still be confirmed before purchase.
NJ207 bearing specifications
| Parameter | Value |
|---|---|
| Model | NJ207 |
| Category | Cylindrical Roller Bearing |
| Series | NJ200 Series |
| Inner Diameter (ID) | 35 mm |
| Outer Diameter (OD) | 72 mm |
| Width | 17 mm |
| Material | Chrome Steel GCr15 |
| Closure | Open |
| Dynamic Load | 52.0 kN |
| Static Load | 55.0 kN |
| Speed Limit | 9000 RPM |
| Precision | P0 (ABEC-1) |
| Clearance | CN (Standard) |
NJ207 brand designation references
Interchange Numbers: NJ207
Catalogue designations reviewed for this model include SKF NJ207ECP, FAG NJ207E.TVP2, NSK NJ207EM, NTN NJ207, Timken NJ207.
These catalogue references have source records, but the complete suffix and operating requirement must still be confirmed.
| Brand | Brand designation | Reference status |
|---|---|---|
| SKF | NJ207ECP | Source recorded SKF rolling bearing catalogue — NJ207ECP · |
| FAG | NJ207E.TVP2 | Source recorded Schaeffler FAG rolling bearing catalogue — NJ207E.TVP2 · |
| NSK | NJ207EM | Source recorded NSK rolling bearing catalogue — NJ207EM · |
| NTN | NJ207 | Source recorded NTN rolling bearing catalogue — NJ207 · |
| Timken | NJ207 | Source recorded Timken bearing catalogue — NJ207 · |
Frequently asked questions about NJ207
What does the open design mean on a NJ207 bearing?
The NJ207 (35mm x 72mm x 17mm) is supplied open — without seals or shields — so lubrication and relubrication come from the surrounding housing or an external system. Compare seal types before deciding on the replacement.
Which part numbers are equivalent to NJ207?
Equivalent designations include NJ207ECP, NJ207E.TVP2, NJ207EM . These are brand-specific numbers for the same ISO boundary dimensions as the NJ207 (35mm x 72mm x 17mm). The basic number matching does not confirm the complete specification — compare seal type, clearance, precision, cage, and lubrication suffix before ordering.
Does the NJ207 come with C3 clearance?
This directory lists the NJ207 with CN (Standard). C3 (increased internal clearance) versions are common for higher operating temperatures, higher speeds, or press-fit arrangements — specify the required clearance on your RFQ so the quotation matches the application. Read the clearance guide.
The NJ207 is listed as a 35×72×17mm cylindrical roller bearing in open configuration. Part of the NJ200 series, the directory records chrome steel gcr15 and P0 (ABEC-1) precision grade for RFQ verification.
The NJ207 bearing cross-references to SKF NJ207ECP, FAG NJ207E.TVP2 and NSK NJ207EM. This means you can replace an SKF equivalent, FAG alternative, NSK cross reference, or NTN interchange part with the same ISO boundary dimensions. Compare the full specification table and designation suffixes before ordering, especially the seal type (2RS vs ZZ) and internal clearance (C3 vs CN).
About the NJ200 Series
The NJ200 series cylindrical roller bearings have one integral flange on the inner ring, providing limited axial location in one direction. Used where some axial guidance is needed alongside high radial load capacity.
Common Applications
- Electric Motors
- Machine Tools
- Gearboxes
- Pumps
- Compressors
Common applications for NJ207
The NJ207 is a common replacement candidate in the following equipment. Open the application guide to confirm the checks that apply to your machine before ordering:
Compare NJ207 with nearby sizes
These models are the closest sizes in the same bearing family. They are not interchangeable — confirm the bore, outside diameter, and width before replacing the existing part.
| Model | Dimensions | Closure | Action |
|---|---|---|---|
| NJ206 | 30mm x 62mm x 16mm | Open | View specifications |
| NU206 | 30mm x 62mm x 16mm | Open | View specifications |
| NU207 | 35mm x 72mm x 17mm | Open | View specifications |
| NJ208 | 40mm x 80mm x 18mm | Open | View specifications |
| NU208 | 40mm x 80mm x 18mm | Open | View specifications |
Fast bearing RFQ
Tell us what bearing you need.
A model number is enough to start. If the marking is unclear, send the dimensions, application, or a shared photo link in the message.
- Small repair quantities and mixed model lists
- Model, suffix, and replacement review
- Price, lead time, packing, and shipping details