Model datasheet
UCP215 Pillow Block Bearing 75mm
Confirm the model number, dimensions, suffix, and replacement notes before sending a quotation request for repair or MRO sourcing.
Verified directory reference: Specifications have been reviewed, but the complete suffix and current order requirement must still be confirmed before purchase.
UCP215 bearing specifications
| Parameter | Value |
|---|---|
| Model | UCP215 |
| Category | Pillow Block Bearing |
| Series | UCP200 Series |
| Shaft Diameter | 75mm |
| Material | Cast Iron Housing + Chrome Steel Bearing |
| Closure | Sealed |
| Precision | P0 (ABEC-1) |
| Clearance | CN (Standard) |
UCP215 brand designation references
Interchange Numbers: UCP215
Catalogue designations reviewed for this model include SKF UCP215, FAG UCP215, NSK UCP215, NTN UCP215, Timken UCP215.
These catalogue references have source records, but the complete suffix and operating requirement must still be confirmed.
| Brand | Brand designation | Reference status |
|---|---|---|
| SKF | UCP215 | Source recorded SKF rolling bearing catalogue — UCP215 · |
| FAG | UCP215 | Source recorded Schaeffler FAG rolling bearing catalogue — UCP215 · |
| NSK | UCP215 | Source recorded NSK rolling bearing catalogue — UCP215 · |
| NTN | UCP215 | Source recorded NTN rolling bearing catalogue — UCP215 · |
| Timken | UCP215 | Source recorded Timken bearing catalogue — UCP215 · |
Frequently asked questions about UCP215
What does the sealed design mean on a UCP215 bearing?
The UCP215 (Shaft 75mm) is supplied as a sealed unit with an integral seal configuration, which is typical for mounted and pre-lubricated designs. Confirm the seal material and relubrication access for the application. Compare seal types before deciding on the replacement.
Does the UCP215 come with C3 clearance?
This directory lists the UCP215 with CN (Standard). C3 (increased internal clearance) versions are common for higher operating temperatures, higher speeds, or press-fit arrangements — specify the required clearance on your RFQ so the quotation matches the application. Read the clearance guide.
The UCP215 is listed as a 75mm shaft pillow block bearing in sealed configuration. Part of the UCP200 series, the directory records cast iron housing + chrome steel bearing and P0 (ABEC-1) precision grade for RFQ verification.
The UCP215 uses the same part number designation across SKF, FAG, NSK, NTN, and Timken catalogs. This is a standardized pillow block bearing with industry-standard boundary dimensions. Confirm the housing style, shaft diameter, and seal type before ordering a replacement.
About the UCP200 Series
The UCP200 series is a pillow block mounted bearing unit with a cast iron housing and a chrome steel insert bearing. The set-screw locking mechanism provides secure shaft attachment. Designed for easy installation on flat surfaces in conveyor systems and material handling equipment.
Common Applications
- Conveyors
- Fans
- Agricultural Machinery
- Material Handling
Common applications for UCP215
The UCP215 is a common replacement candidate in the following equipment. Open the application guide to confirm the checks that apply to your machine before ordering:
Compare UCP215 with nearby sizes
These models are the closest sizes in the same bearing family. They are not interchangeable — confirm the bore, outside diameter, and width before replacing the existing part.
| Model | Dimensions | Closure | Action |
|---|---|---|---|
| UCF214 | Shaft 70mm | Sealed | View specifications |
| UCP214 | Shaft 70mm | Sealed | View specifications |
| UCF215 | Shaft 75mm | Sealed | View specifications |
| UCF216 | Shaft 80mm | Sealed | View specifications |
| UCP216 | Shaft 80mm | Sealed | View specifications |
Fast bearing RFQ
Tell us what bearing you need.
A model number is enough to start. If the marking is unclear, send the dimensions, application, or a shared photo link in the message.
- Small repair quantities and mixed model lists
- Model, suffix, and replacement review
- Price, lead time, packing, and shipping details